Preorders open now — Mantel ships early 2027.Preorders open now. Preorder →

Mantel
Preorder

Build your own

Have a Seeed e-paper board? Put Mantel on it from your browser.

Seeed XIAO 7.5″ ePaper Panel

ESP32-C3, white enclosure, 2000 mAh battery. The board Mantel frames are built on.

Seeed reTerminal E1001

ESP32-S3 with a 7.5″ monochrome panel.

TRMNL 7.5″ OG DIY Kit

Seeed XIAO ESP32-S3 Plus with the 7.5″ panel.

  1. Plug the board into a computer with a USB-C data cable.
  2. Pick your board and click Install. Use Chrome or Edge on a computer; it takes about a minute.
  3. After flashing, this page asks for your Wi-Fi over USB (Improv). Or skip it and use the frame's Mantel-XXXX hotspot from your phone.
  4. Scan the code on the screen, or type it on the claim page, to add it to your account.
This browser can't talk to USB devices. Open this page in Chrome or Edge on a computer. USB access needs a secure (https) page.

This is an early preview and hasn't been tested on every board yet. Installing erases the board; if you reinstall later, you'll set up Wi-Fi and add the frame to your account again.